OIKO AUDIO

TACK / INSTALL / 0.12.0

Install Tack

Connect the FM-1 by USB, then press Install. It works in Chrome or Edge; the browser asks once to allow MIDI: allow it.

Do not unplug the USB cable while writing.

recovering an FM-1 that won't start

www.m-vave.com/download (opens in a new tab)

Back up first. (opens in a new tab)


  
  
Back to the stock firmware

  

  
    
    
  1.  V15, kept by the Internet Archive, or V16, M-VAVE's current download. V16 also replaces the FM-1's bootloader, and Tack has not run on that bootloader, so use V15 if you plan to come back.
    2. 
    

    3. 
    
  3. 
  

  

  
Report a problem

  

  

    

  

  
  
  
Back to Tack




  

    

    

    

  



  

    

    
Back up first. 
       (opens in a new tab)

    

    

    

    

      

  




  
Tack is built on fm1-base and felucca-bsp, from Felucca by Leo Kuroshita (@kurogedelic), Hügelton Instruments (opens in a new tab). Tack's engine is the LXR firmware by Erica Synths. USB audio's 10 channels are after Acid Moogi by Tom Perez, itself from Felucca by Leo Kuroshita, GPL-3.0.

    Fonts: Barlow Semi Condensed (SIL OFL 1.1). M-VAVE and FM-1 are trademarks of their respective owners.

     github.com/oikoaudio/tack (opens in a new tab)


tack-0.12.0.fwsc, 611,496 bytes, identity FM-1_47001200.
SHA-256 d183e91811d10450334134bc14c9e1c5a1fed76a6ff6c2fb4cbab2e4197490ed
Download the package · Licence · Notice